The temperature sensor is used for temperature measurement and monitoring. The effect of the temperature on a resistance RTD temperature probe generates a signal, which is amplified, digitalized and processed.
Instead of an analogue output this device offers a digital interface IO-Link.
This allows bidirectional data transfer with any IO-Link Master. Data access is done by using the available standardized IODD.
The IO-Link is in accordance to the specification version 1.1. IO-Link. The bidirectional communication is used to read process data, diagnostic information, status messages and to set parameters. The two green LEDs are permanently lit as soon as power is supplied to the device. Once an IO-Link connection is established, the LEDs flash.
The switching behaviour and the switching thresholds of the digital outputs (max. 2 pieces; “PNP” or “NPN”) can be individually configured – as well as many other parameters.
Single RTD temperature probe, type Pt1000
Process connections: G ½", clamp DN 10/20 according to DIN 32676
Temperature measurement range: - 50…+ 150 °C
Switching functions available : PNP or NPN
Access to measurement value, device status and settings via IO-Link interface, very easy sensor replacement