Share via email

Some fields are missing
Bürkert - Close to you
Office /1
    • Main Office
      Burkert Japan Ltd.
      Shiratoribashi Mikasa-building
      1-12-15 Suido, Bunkyo-ku,
      Tokyo 112-0005
      電話番号 +81 35804 5020
      Fax +81 35804 5021
      E-Mail vasb.wca@ohexreg.pbz
      Website http://www.burkert.jp/
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
 

    サーボ制御2/2方ピストンバルブ

    Type 6407 / Ident No. 320863

    Compare now 印刷
    Produkt-Foto Typ 6407

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 6407
    • Produkt-Foto Typ 6407
    • Produkt-Foto Typ 6407
    • Produkt-Foto Typ 6407
    • Produkt-Foto Typ 6407
    • Massbild
    • Massbild
    • Massbild
    • Massbild
    • 9000404672.jpeg
    • 9000417344.jpeg

    Servo-assisted 2/2 way piston valve

    • 公称径DN50以下のサーボ制御ピストンバルブ
    • 差圧のない連結ピストンシステムによる安全な開口
    • 耐震反転式コイルシステム
    • 防爆仕様
    • キックアンドドロップ仕様の省エネ二重コイル技術

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    バルブ6407はサーボ制御のピストンバルブです。パイロットバルブとピストンとの固定された結合は、バルブが差圧なしに開くことを可能にします。タイプ6407は、ピストンバルブとして、ガスおよび蒸気ならびに0 ℃以下の低い作動温度を有する液体に特に適しています。圧力と漏れの安全性を高めるために、プラグとコアガイドパイプは一緒に溶接されています。用途に応じて、異なるシール材の組み合わせを利用することができます。コイルは、化学耐性の高いエポキシ樹脂でオーバーモールドされています。動作中の電力消費を低減するために、二重コイル技術で一体化された„キックアンドドロップ“ (KD) 電子回路を備えたコイルが利用可能です。DIN EN 175301-803 Form A準拠のプラグと併せて、バルブは保護等級IP65を満たしています。


    Commodity Codes
    84818079
    国名
    DE

    Technical attributes

    名前
    Value
    Unit
    Type 6407
    Operation force-controlled
    Actuator type Plunger valve
    Main valve operating principle Globe valve
    Switch function on/off
    Media separation No
    Valve function A - normally closed - inlet port 1 (P/NC)
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation No
    Flow Above seat
    Nominal pressure min 0 bar
    Nominal pressure max (liquid) 10 bar
    Main valve orifice 1 (P) (mm) 13 mm
    Main valve orifice 1 (inch) 1/2 inch
    Kv value (water) 3,4 m3/h
    QNn value (gas) 3.650 l/min
    Main valve wetted material Brass
    Port connection 1 type Inner thread
    Port connection 1 thread type NPT
    Port connection 1 thread marking 1/2
    Port connection 2 type Inner thread
    Port connection 2 thread type NPT
    Port connection 2 thread marking 1/2
    Valve seat material Stainless steel
    Seat seal material category Plastics
    Seat seal material PTFE (Polytetrafluorethylene)
    Sealing toward outside material Graphite
    Temperature environment max 45 °C
    Temperature medium min -40 °C
    Temperature medium max 150 °C
    Voltage / rated voltage 110 V
    Voltage / rated voltage 120 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    Voltage frequency 50/60 Hz
    AC voltage Yes
    DC voltage Yes
    Battery voltage Yes
    Rated power DC 8,5 W
    Reduced power DC 8,5 W
    Rated power consumption 85 W
    inrush power consumption AC 85 V·A
    Rated power AC 8,5 V·A
    Electrical connection sort Plug pattern form A according to DIN EN 175301-803
    Electrical connection number of contacts 2 + Grounding conductor
    Cable plug in delivery not included
    Electrical connection position in direction of flow left
    Protection type (IP max. with suitable connector) IP65
    Coil type placed on top
    Coil insulation material category (encasement) Plastics
    Coil insulation material (encasement) Epoxy
    Coil size 42 mm
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity recovery diode No
    Coil special feature for high temperatures
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Switch time open min 100 ms
    Switch time open max. 200 ms
    Switch time close min 300 ms
    Switch time close max. 500 ms
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oxygen version No
    Oil burner valve No
    Steam version Yes
    Low-noise version No
    Main valve with integrated screen No
    Installation length 65 mm
    Valve construction Valve complete
    Weight 0,118000 kg
    Approval type
    Certification type
    Show full table Collapse table

    Applications & Tools

    CAD Model

    Cookies must be enabled to use this function. Please accept cookie privacy policy first.


    Downloads

    Data Sheets

    説明
    Filesize
    Language / Country
    DTS Type 6407 data sheet | Servo-assisted piston valve 1.4 MB EN / EU
    DTS Typ 6407 Datenblatt | Servogesteuertes Kolbenventil 1.3 MB DE / DE

    User Manuals

    説明
    Filesize
    Language / Country
    MAN Operating Instructions Type 6407 | 2/2-way solenoid valve 810.9 kB EN / EU
    MAN Bedienungsanleitung Typ 6407 | 2/2-Wege-Magnetventil 813.5 kB DE / DE
    MAN Manuel d'utilisation Type 6407 | Électrovanne 2/2 voies 818.4 kB FR / FR

    EU Declaration of Conformity

    説明
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 2.7 MB EN,FR,DE

    My Comparison List