Bürkert
サーボ制御2/2方ダイヤフラムバルブ
Type 6213 / Ident No. 247882
Product description
バルブ6213 EVはS.EV製造シリーズのサーボ制御ダイヤフラムバルブです。ダイヤフラムのバネ結合は、バルブが開く動きを促します。スタンダードタイプは、液体に使用するバルブに適しています。完全に開くためには、最小差圧が必要です。気体及び真空で使用するには、差圧がなくてもバルブを開く特殊な製品（HP00）をご利用いただけます。お使いの用途に合わせて、様々なダイヤフラム材料をご利用いただけます。標準真鍮ケースは欧州のあらゆる飲料水要求事項を満たします。その他の需要に応じて、無鉛真鍮または耐脱亜鉛性真鍮各種をご利用いただけます。ご提供のケースは、ステンレスタイプの仕上がりです。ソレノイドは化学耐性の高いエポキシ樹脂でオーバーモールドされています。エネルギー需要を抑えるために、すべてのコイルは消費電力を低減したタイプでお届けできます。DIN EN 17301-803フォームA準拠のプラグと接続した場合、本バルブの保護等級はIP65となります。ステンレスケースと接続した場合は、NEMA 4Xになります。
- Commodity Codes
- 84818079
- 国名
- DE
Technical attributes
名前 |
Value |
Unit |
|---|---|---|
| Type | 6213 | |
| Operation | servo-controlled | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Diaphragm valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 10 | bar |
| Nominal pressure (DIN EN 1333) | PN 10 | |
| Main valve orifice 1 (P) (mm) | 10 | mm |
| Main valve orifice 1 (inch) | 3/8 inch | |
| Kv value (water) | 1,9 | m3/h |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/2 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/2 | |
| Valve seat material | Stainless steel | |
| Medium-contacting part core material | Stainless steel | |
| Medium-contacting part stopper material | Stainless steel | |
| Pilot control material medium-contacting | PA (Polyamide) | |
| Valve body cover material | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | NBR (Nitrile rubber) | |
| Sealing toward outside material | NBR (Nitrile rubber) | |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 80 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 8 | W |
| inrush power consumption AC | 24 | V·A |
| Rated power AC | 8 | V·A |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | not included | |
| Electrical connection position | in direction of flow left | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Protection type NEMA (max. with suitable connector) | NEMA 4X | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | PA (Polyamide) | |
| Coil size | 32 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity protection | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | B | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 30 | ms |
| Switch time close min | 100 | ms |
| Switch time close max. | 150 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control orifice (mm) | 1,2 | mm |
| Pilot control seal material | NBR (Nitrile rubber) | |
| Pilot control centrally bolted | Yes | |
| Low-noise version | No | |
| Core guide | Sliding ring | |
| Main valve with integrated screen | No | |
| Installation length | 55 | mm |
| Parts free of silicone | Yes (according to DIS 1000020797) | |
| Parts free of oil and grease | Yes (according to DIS 1000020797) | |
| Valve construction | Valve complete | |
| Weight | 0,391000 | kg |
Can be combined with
Applications & Tools
Downloads
Data Sheets
説明 |
Filesize |
Language / Country |
|
|---|---|---|---|
|
Type 6213 data sheet | servo-assisted diaphragm valve | 702.3 kB | EN / EU |
|
|
Typ 6213 Datenblatt | servogesteuertes Membranventil | 858.3 kB | DE / DE |
|
|
Type 6213 Fiche technique |Vanne à membrane 2/2 voies pilotée | 1.4 MB | FR / FR |
User Manuals
説明 |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6013 | PX04 Use in the explosion-hazard area | 138.7 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6213 | safety shut-off device for combustion installations | 832.9 kB | EN,FR,DE / EU |
|
|
Additional manual Type AC10 | Solenoid coil AC10, ATEX approval | 1.5 MB | EN / EU |
|
|
Additional manual Type AC19 | Solenoid coil AC19, II 2G/D Ex approval | 1.6 MB | EN / EU |
|
|
Návod k obsluze Type 6213 | 2/2-cestný magnetický ventil | 1.3 MB | / CZ |
|
|
Operating Instructions Type 6213 6281 | 2/2-way solenoid valve | 1.3 MB | EN / EU |
|
|
Operating Instructions Type 6213 | 2-way solenoid valve, internally piloted | 474.3 kB | EN / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1.3 MB | EN,FR,DE / EU |
|
|
Service manual Type 6213 | Replacement of coil set and stopper set | 921.5 kB | EN,FR,DE / EU |
|
|
Supplement Type 6213 | Versions with integrated High-performance electronics | 306 kB | EN / EU |
|
|
Bedienungsanleitung Typ 6213 6281 | 2/2-Wege-Magnetventil | 1.3 MB | DE / DE |
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1.2 MB | IT / IT |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1.4 MB | PT / BR |
|
|
Manuel d'utilisation Type 6213 6281 | Électrovanne 2/2 voies | 1.3 MB | FR / FR |
|
|
Manuel supplémentaire Type AC10 | Bobine magnétique AC10, homologation ATEX | 1.6 MB | FR / FR |
|
|
Manuel supplémentaire Type AC19 | Bobine magnétique AC19, homologations II 2G/D Ex | 1.7 MB | FR / FR |
|
|
Zusatzanleitung Typ AC10 | Magnetspule AC10, ATEX Zulassung | 1.5 MB | DE / DE |
|
|
Zusatzanleitung Typ AC19 | Magnetspule Typ AC19, II 2G/D ExZulassung | 1.6 MB | DE / DE |
EU Declaration of Conformity
説明 |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 4.8 MB | EN,FR,DE |
Interactive Animation
説明 |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
3D-Animation - 6213 | 3.2 MB | EN |
Flyers and Catalogues
説明 |
Filesize |
Language / Country |
|
|---|---|---|---|
|
|
Brochure contains the following types: 6027 5406 5407 6213 | 773 kB | JP |
|
|
723 kB | AF | |
|
|
Solenoid valves for safety in your plant | 786.8 kB | EN / EU |