Share via email

Some fields are missing
Bürkert - Close to you
Office /1
    • Main Office
      Burkert Japan Ltd.
      Shiratoribashi Mikasa-building
      1-12-15 Suido, Bunkyo-ku,
      Tokyo 112-0005
      電話番号 +81 35804 5020
      Fax +81 35804 5021
      E-Mail vasb.wca@ohexreg.pbz
      Website http://www.burkert.jp/
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
 

    サーボ制御2/2方ダイヤフラムバルブ

    Type 0142 / Ident No. 17772

    Compare now 印刷
    Produkt-Foto Typ 0142

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 0142
    • Produkt-Foto Typ 0142
    • 9000099174.jpeg

    2/2-way-solenoid valve f.aggress. medium

    • 公称径DN 63以下のサーボ制御ダイヤフラムバルブ
    • 汚染された腐食性媒体用のプラスチックバルブ
    • 媒体分別式メタルフリー
    • メンテナンスしやすいマニュアルアクチュエータ
    • ポジションフィードバックによる切替え安全性

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    0142バルブは、サーボ制御式のダイヤフラムバルブです。バルブが機能するためには最小差圧が必要です。お使いの用途に合わせて、様々なダイヤフラム材料をご利用いただけます。さらに、PVC製やPVDF製のケースもご用意しています。3/2方パイロットバルブは、ホームポジション上で回転することによってスムーズにNCからNOに改造できます。パイロットバルブのポジションフィードバックは、切り換えシグナルまたはNAMURシグナルを介して行われます。ソレノイドは化学耐性の高いエポキシ樹脂でオーバーモールドされています。試運転と検査のために0142にはマニュアルアクチュエータを装備しています。エネルギー需要を抑えるために、すべてのコイルは消費電力を低減したタイプでお届けできます。DIN EN 17301-803フォームA準拠のプラグと接続した場合、本バルブの保護等級はIP65とNEMA 4Xとなります。


    Commodity Codes
    84818079
    国名
    DE

    Technical attributes

    名前
    Value
    Unit
    Type 0142
    Operation servo-controlled
    Actuator type Pivot
    Main valve operating principle Diaphragm valve
    Switch function on/off
    Media separation Yes
    Valve function B - normally open - inlet port 1 (P/NO)
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation Yes
    Valve function manual actuation type Key button
    Valve function manual actuation material PA (Polyamide)
    Valve function manual actuation stop Yes
    Valve function manual actuation screw slot No
    Flow Above seat
    Nominal pressure min 0,5 bar
    Nominal pressure max (liquid) 6 bar
    Main valve orifice 1 (P) (mm) 25 mm
    Main valve orifice 1 (inch) 1 inch
    Kv value (water) 14 m3/h
    QNn value (gas) 15.000 l/min
    Main valve wetted material PVC (Polyvinyl chloride)
    Port connection 1 type Bonded sleeve
    Port connection 1 size DN DN 25
    Port connection 1 inner diameter (mm) 32 mm
    Port connection 2 type Bonded sleeve
    Port connection 2 size DN DN 25
    Port connection 2 inner diameter (mm) 32 mm
    Pilot control material medium-contacting PVDF (Polyvinylidene fluoride)
    Seat seal material category Elastomer
    Seat seal material EPDM (Ethylene-propylene-diene rubber)
    Sealing toward outside material EPDM (Ethylene-propylene-diene rubber)
    Temperature environment max 40 °C
    Temperature medium min 0 °C
    Temperature medium max 50 °C
    Voltage / rated voltage 230 V
    Voltage / rated voltage 230 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    Voltage frequency 50/60 Hz
    AC voltage Yes
    DC voltage No
    Battery voltage No
    Rated power consumption 5 W
    Electrical connection sort Plug pattern form A according to DIN EN 175301-803
    Electrical connection number of contacts 2 + Grounding conductor
    Cable plug in delivery enclosed
    Cable plug art. no. - type 00161487 - 2508
    Electrical connection position top
    Protection type (IP max. with suitable connector) IP65
    Coil type block bolted
    Coil insulation material category (encasement) Plastics
    Coil insulation material (encasement) Epoxy
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity recovery diode No
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Switch time open min 100 ms
    Switch time open max. 800 ms
    Switch time close min 1.000 ms
    Switch time close max. 4.000 ms
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oil burner valve No
    Steam version No
    Pilot control orifice (mm) 2 mm
    Pilot control seal material EPDM (Ethylene-propylene-diene rubber)
    Low-noise version No
    Main valve with integrated screen No
    Valve construction Valve complete
    Weight 1,150000 kg
    Show full table Collapse table

    Downloads

    Data Sheets

    説明
    Filesize
    Language / Country
    DTS Type 0142 data sheet | servo-assisted solenoid valve with diaphragm 685.2 kB EN / EU
    DTS Type 0142 data sheet | servo-assisted solenoid valve with diaphragm [US units] 357.5 kB EN / US
    DTS Typ 0142 Datenblatt | Durchgangsmagnetventil mit Servomembran für aggressive Medien 710.9 kB DE / DE

    User Manuals

    説明
    Filesize
    Language / Country
    MAN Operating Instructions Type 0142 | 2/2-way solenoid valve 853.3 kB EN / EU
    MAN Operating Instructions Type 0780 | ATEX approval 1.5 MB EN,FR,DE / EU
    MAN Operating Instructions Type ACP016 | Solenoid coil ACP016, II 2G/D Ex approval 1.5 MB EN / EU
    MAN Bedienungsanleitung Typ 0142 |2/2-Wege-Magnetventil 855.9 kB DE / DE
    MAN Bedienungsanleitung Typ ACP016 | Magnetspule ACP016, II 2G/D Ex Zulassung 1.5 MB DE / DE
    MAN Manuel d'utilisation Type ACP016 | Bobine magnétique ACP016, homologation II 2G/D Ex 1.6 MB FR / FR
    MAN Manuel d‘utilisation Type 0142| Électrovanne à 2/2 voies 872.1 kB FR / FR
    MAN Procesní instrukce Typ 0142 |2/2-cestný elektromagnetický ventil 877.9 kB CS / CZ

    EU Declaration of Conformity

    説明
    Filesize
    Language / Country
    ABD EU-DoC|EU Declaration 5.6 MB EN,FR,DE

    My Comparison List