Share via email
Some fields are missing
Bürkert - Close to you
Office /1
    • Main Office
      Burkert Japan Ltd.
      Shiratoribashi Mikasa-building
      1-12-15 Suido, Bunkyo-ku,
      Tokyo 112-0005
      電話番号 +81 35804 5020
      Fax +81 35804 5021
      E-Mail vasb.wca@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center

    This article number 00167740 is only available for a limited time.

    Please contact us regarding a successor product.


    Type 2610 / Ident No. 167740

    Compare now 印刷
    Produkt-Foto Typ 2610

    The depiction of the products may differ from the actual specific design.

    Please consider the technical attributes.

    • Produkt-Foto Typ 2610

    2/2-way-solenoid valve

    • 溶媒から隔離された公称径DN 12以下の直動式バルブ
    • 溶接加工された金属蛇腹システム(316Ti)
    • 高品質なPTFE座面パッキング
    • 最低温度 -200 °C ~+180 °C
    • 省エネ型「キックアンドドロップ」電装部品

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Product description

    2610バルブは、直動式・媒体分離式のプラジャ型バルブです。バルブ2610は直動式プランジャ型バルブです。熱的な構造や気密性の上からコイルとケースを分離するには、ステンレス製の金属蛇腹を使用し、極端な溶媒温度や腐食性の溶媒にも対応します。コイルは化学耐性の高いエポキシ樹脂でオーバーモールドされています。そのためバルブは、特に危険媒体の使用に適しています。製品に付属する「キックアンドドロップ」電装部品を備えたケーブルヘッドがバルブの開口動作を促し、開口後の電力を保持出力に抑えます。DIN EN 17301-803フォームA準拠のプラグと接続した場合、本バルブの保護等級はIP65となり、ステンレススチールケースと接続した場合NEMA 4Xとなります。

    Commodity Codes

    Technical attributes

    Type 2610
    Operation direct-acting
    Actuator type Plunger valve
    Main valve operating principle Globe valve
    Switch function on/off
    Media separation Yes
    Valve function A - normally closed - inlet port 1 (P/NC)
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation No
    Flow Above seat
    Nominal pressure min 0 bar
    Nominal pressure max (liquid) 10 bar
    Main valve orifice 1 (P) (mm) 8 mm
    Main valve orifice 1 (inch) 5/16 inch
    Kv value (water) 0,9 m3/h
    QNn value (gas) 970 l/min
    Main valve wetted material Stainless steel
    Port connection 1 type Inner thread
    Port connection 1 thread type G
    Port connection 1 thread marking 1/2
    Port connection 2 type Inner thread
    Port connection 2 thread type G
    Port connection 2 thread marking 1/2
    Seat seal material category Plastics
    Seat seal material PTFE (Polytetrafluorethylene)
    Sealing toward outside material PTFE (Polytetrafluorethylene)
    Temperature environment min -40 °C
    Temperature environment max 50 °C
    Temperature medium min -200 °C
    Temperature medium max 180 °C
    Voltage / rated voltage 24 V
    Voltage / rated voltage 24 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    Voltage frequency 50/60 Hz
    AC voltage Yes
    DC voltage Yes
    Battery voltage Yes
    Rated power DC 72 W
    Reduced power DC 4 W
    Rated power consumption 72 W
    Electrical connection sort Screw terminal with cable feed-through
    Electrical connection number of contacts 2 + Grounding conductor
    Cable plug in delivery enclosed
    Cable plug art. no. - type 00181630 - 2511
    Electrical connection position in direction of flow left
    Protection type (IP max. with suitable connector) IP65
    Coil type placed on top
    Coil insulation material (encasement) Epoxy
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity recovery diode No
    Coil special feature for high temperatures
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oil burner valve No
    Steam version No
    Low-noise version No
    Main valve with integrated screen No
    Valve construction Valve complete
    Leakage rate external 10^-8 mbar l/sec
    Weight 1,060000 kg
    Show full table Collapse table


    Data Sheets

    Language / Country
    DTS Type 2610 data sheet | pivoted armature valve for low and high temperatures 235 kB EN / EU
    DTS Typ 2610 Datenblatt | Durchgangsmagnetventil für tiefe und hohe Temperaturen 240 kB DE / DE

    User Manuals

    Language / Country
    MAN Additional Manual Type 0131 0255 0256 0283 0287 0290 0293 2610 | El. operating conditions 132 kB EN,FR,DE / EU
    MAN Additional manual Type AC19 | Solenoid coil AC19, II 2G/D Ex approval 2 MB EN / EU
    MAN Operating Instructions Typ 2610 2612 2620 | 2/2-way valve 374 kB EN / EU
    MAN Bedienungsanleitung Typ 2610 2612 2620 | 2/2-Wege-Ventil 414 kB DE / DE
    MAN Manuel d'utilisation Type 2610 2612 2620 | Vanne 2/2 voies 422 kB FR / FR
    MAN Manuel supplémentaire Type AC19 | Bobine magnétique AC19, homologations II 2G/D Ex 2 MB FR / FR
    MAN Zusatzanleitung Typ AC19 | Magnetspule Typ AC19, II 2G/D ExZulassung 2 MB DE / DE

    EU Declaration of Conformity

    Language / Country
    ABD EU-DoC|EU Declaration 36 kB EN,FR,DE

    Interactive Animation

    Language / Country
    3D_ANIMATION 3D-Animation - 2610 2 MB EN

    Flyers and Catalogues

    Language / Country
    MISC 4 MB EU
    MISC For low temperatures and aggressive media. 156 kB EN / JP
    MISC   723 kB AF
    MISC Solenoid valves for safety in your plant 787 kB EN / EU

    My Comparison List